EX4200-24PX-TAA Juniper Networks 24PX Ethernet Switch

Description

EX4200-24PX-TAA Technical Specifications

Juniper Networks EX 4200 24PX Switch with 24 Managed Ports

Manufacturer: Netscreen
Brand: Juniper, Juniper Networks
Product Line: Juniper Networks EX 4200
Model: 24PX
Packaged Quantity: 1
Chassis
Built-in Devices: Status LCD
Processor
Type: PowerPC
Clock Speed: 1 GHz
RAM
Installed Size: 1 GB
Flash Memory
Installed Size: 1 GB
Performance
Performance: Throughput 65 Mpps
Networking
Type: Switch
Subcategory: Network hubs and switches
Subtype: Gigabit Ethernet
Form Factor: Desktop
Stackable: Yes
Max Units in a Stack: 10
Ports Quantity: 24
Advanced Switching: Layer 3
Routing Protocols: IGMPv2, BGP, IS-IS, OSPF, VRRP, IGMP, RIP-2, RIP-1, Static IP routing, IGMPv3, PIM-SM, Policy-based routing (PBR)
MAC Address Table Size: 32K entries
Jumbo Frame Support: 9216 bytes
Manageable: Yes
Remote Management Protocol: RMON 9, HTTP, SSH-2, SNMP 1, RMON, SNMP 2, RMON 1, HTTPS, RMON 2, RMON 3, SNMP 3
Power Over Ethernet (PoE): PoE+
Status Indicators: LCD display
Features: VLAN support, Virtual Chassis technology, Hot swap module replacement, Layer 2 switching, PoE+, IGMP snooping, MPLS support, Time Domain Reflectometry (TDR), DHCP server, RADIUS support, Power over Ethernet (PoE), Auto-uplink (auto MDI/MDI-X), Dynamic ARP Inspection (DAI), Temperature sensor, DHCP snooping, DHCP proxy, DoS attack prevention, Non-Stop Bridging (NSB), sFlow, Routing, Jumbo Frames support, Quality of Service (QoS), High Availability, Graceful Route Engine Switchover (GRES), Non-Stop Routing (NSR), IPv6 support, Redundant trunk group (RTG), Syslog support, DHCP support, Layer 3 switching, Store and forward, ARP support
Compliant Standards: IEEE 802.3ad (LACP), IEEE 802.1s, IEEE 802.3af, IEEE 802.1D, IEEE 802.1p, IEEE 802.1x, IEEE 802.1w, IEEE 802.1ab (LLDP), IEEE 802.1Q
Ports
Quantity: 24
Type: 10/100/1000 (PoE+)
Expansion Slots
Expansion Slots: 1 (total) / 1 (free) x expansion slot
Interface Provided
Interfaces: 1 x console management, 24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE+, 1 x network stack device
Cable Details
Cables Included: 1 x stacking cable – 1.6 ft
Software
Type: Juniper NetScreen-Security Manager
Power Device
Type: Internal power supply
Hot-Plug: Yes
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Installed Quantity: 1
Max Supported Quantity: 2
Nominal Voltage: AC 120/230 V
Power Consumption Operational: 930 watts
Miscellaneous
TAA Compliant: Yes
Height (Rack Units): 1
Encryption Algorithm: TTLS, MD5, TLS, PEAP
Authentication Method: RADIUS, TACACS+, Extensible Authentication Protocol (EAP), Secure Shell v.2 (SSH2)
Compliant Standards: FCC CFR47 Part 15, EN 60950-1, EN300-386, CISPR 22 Class A, ICES-003 Class A, EN55022 Class A, CSA 22.2 No. 60950, IEC 60950-1, VCCI Class A ITE, UL 60950-1, cUL, EN55024, RoHS 5/6, TUV GS, EN 300 386
Dimensions & Weight
Width: 17.4 inches
Depth: 16.4 inches
Height: 1.7 inches
Weight: 18.08 lbs
Environmental Parameters
Min Operating Temperature: 32°F
Max Operating Temperature: 113°F
Humidity Range Operating: 10 – 85%